Logosol PH360

Location: Minnesota PH360 4 headed Planer Moulder: The PH360 is a planer/moulder that can work four sides of a workpiece in one action. The planer/moulder is contained in a stable and strong chassis. The planer/moulder table and slide for the moving cutter are made of planed cast iron. The workpiece is fed, lying on the planer table, through the planer by four feed rollers as well as an outfeed roller. The rollers are driven by a chain transmission with separate motor. The workpiece is controlled laterally with adjustable fences and pressure rollers. The work is done using a top cutter and a bottom cutter, that are hung at both ends, as well as two side cutters which are fixed to the planer table. All the cutters are driven by separate motors, via a belt transmission. The cutters and feed rollers are covered by a foldable protective cover plate with window. The cover plate is supplied with a safety switch. Another safety switch sits behind the top edge of the cover plate on the infeed side. A 100 mm (4”) hose is connected to the bottom and side cutters and a 125 mm (5”) hose is connected to the top cutter with the option of an additional 100 mm (4”) for connection to the chip extractor. Call 800-459-2148 for more info