Belt return, Good condition. Line shaft ready. Jacob Zook 115475 Grey Rd. 3 RR4 Chesley, ON. NOG1...
Portable, steel wheels, new 35 hp Vanguard motor, 12v over hyd., fully automated, has hyd. pressu...
55 hp. Yanmar engine and has the new brand of setworks - Wood-Mizer did a complete check on this ...
100 hp Iveco diesel, 3000 hrs., 30"w x 40' long cutting capacity, electronic setworks, uses 2" ba...
Rebuilt by Wood-Mizer in 2022, with a new Kohler engine. Make: Wood-Mizer | Stock number: 1614 | Hours: 3128
4045T John Deere diesel with 115 hrs. or 75 hp electric motor. Has taper rollers, heavy duty back...
Has extension for cutting timber up to 52' long. 125 hp 4045 John Deere engine with 4300 hours. S...
3 ph. 480v electrical powered, 30" band wheels, air strain, return belt. This is a reconditioned ...
Right hand, 3 headblock, setworks, tracks, cab, and drive. Complete mill was in operation until t...
Whirlwind up-cut chop saw, electric drive, air power for blade movement, good working condition Make: Whirlwind
Hazelthorn up-cut chop-saw, electric drive for blade, air cylinder for blade movement Make: Unknown | Stock ...
22" blade, no power on the blade, 8' infeed and 6' outfeed, powered rollers, powered kick back. A...
Shop built chop saw, downward cut, air operated with a foot pedal, 5' infeed dead rolls with stop...
2 head-block Renco circle mill, includes BRAND NEW FRICK DOGS, TAPERS AND SET-WORKS, includes fri...
transfer/ log deck, 3 strands, 8' wide x 20' long, H-78 chains, working condition Make: Unknown | Stock numb...
Mellott 4 strand transfer deck, is currently 5' long, price includes custom length up to 20' long...
6 strand deck, H-78 rooftop chains, electric drive, 14' wide x 27' long, very good condition Make: Unknown
5 strand heavy duty deck, 12' 6" wide x 25' long, electric drive, H-78 chain, very good condition Make: Unknown
heavy duty transfer deck, 5 strands, 14' wide x 12' long ,electric drive, H-78 chains, very good ...
roll case/ transfer deck, rolls are 30" wide x 18' 6" long, has side-transfer chains, working con...
Webster vibrating conveyor, 24" wide pan 9" tall sides, 80' long, electric drive, very good condi...
barn sweep, total 80' long-all flat, electric drive, working condition Make: Unknown | Stock number: 10370
dust auger 12' long- 4" dia auger, electric/ gearbox drive, good condition Make: Unknown | Stock number: 10371
roll case 24" wide x 25' long, hyd drive, good working condition Make: Unknown | Stock number: 9261 | Update...
roll case, 24" wide x 25' long, 6" dia rolls, good working condition Make: Unknown | Stock number: 9259
roll case, 50" wide x 22' long, 9" roller dia, each rollers has it's own hyd motor, heavy duty an...
roll case, 30" wide x 35' long, 8" dia rolls, electric drive, includes 4 strand pop-up transfer t...
Some wear on this machine. In operation until the end of 2024 and still in good condition. Make: Morbark
Helle 2 blade vertical edger, 22" dia blade, 40 hp electric drive, price includes going through s...
A clean machine in good running condition. Has side shift, but no forks. Make: Clark | Stock number: 13615
Very good, clean machine, in excellent running condition. Side shift and forks included. Make: Hyster | Stoc...
Continental hyd power unit, 5 hp electric drive, pressure comp pump, approx 10 gal reservoir, goo...
40 hp electric drive hyd unit, pressure comp pump, includes cooling radiator and accumulator, ver...
Cab with AC and heat, serviced @ 2500 hrs., new turbo @ 2000 hrs., new tracks, runs and drives ve...
A clean machine in excellent condition. AC/Heat in the cab. The loader was not in rough operation. Make: Case
bar type log turner, used with 42" carriage, hyd drive, good working condition Make: Salem | Stock number: 8062
Never been used. Douglas Manufacturing, Part #HMG 30. MFG date 1221. 23"w 31" long 8.5" H Call 23...
Reckart cant catcher for drop use with a drop belt, air powered, 4 arms, travel is 30", good work...
Unit has less than 20 hours. Has not been run in several years. Has slight shipping damage on the...
2.5" capacity, 1.5 hp., single phase. Intended to chop metal and plastic banding or band saw blad...
New w/50 hrs. 90 hp, new clutch, Murphy controls Make: John Deere | Stock number: 12607 | Hours: 50 | Update...
Morgan single head resaw with return belt, electric drive, very good condition and ready to work....
pallet dismantler, electric drive, good working condition Make: Unknown | Stock number: 14083 | Updated at: ...
Shop built Morgan style single head resaw, line-shaft ready, good working condition Make: Unknown | Stock nu...
Morgan single head resaw, line-shaft ready, upgraded to rollers guides, very good condition, rece...
15 hp., 3 ph. electric motor. Good condition. Make: Morgan | Stock number: 3602 | Updated at: 2025-01-14 18:...
Brewer Golden Eagle single head resaw, electric drive, 36" dia wheels, return belt, includes nume...
Wood-Mizer PD200 dismantler, electric drive, excellent condition and ready to work Make: Wood-Mizer | Stock ...
This double end trim saw was rebuilt by Showcase Equipment. Computerized setworks. Was in product...
5 strand unscrambler, electric drive, approx. 52" tall, good working condition Make: Unknown | Stock number:...